DexDamp self-stick sound dampening sheets are an easy, effective way to reduce noise in cars, boats and homes.

  • General: Tacky mastic with paintable aluminium top-layer
  • Cost: $12 per sheet for ten or more, Call 206-783-1696
  • Size: 12" x 24" x .078" sheets, .58psf
  • Odor: No toxic or noxious odors
  • Heat Resistance: Continuous exposure to 250° F. Dexdamp can be applied prior to any baking process up to 400° F. Self extinguishing per FMVSS 302.

As a general rule, metal or plastic surfaces may be suitable for DexDamp. Listed below are common damping situations.

  • VEHICLES 

    To reduce road & engine noise treat the floor pan, strut towers, firewall, doors, trunk, roof and dash panels.
  • STEREO SYSTEMS 

    Audio system performance can be improved by treating panels next to speakers or as part of a speaker enclosure.
  • PIPES & TUBING 

    Use as a wrap for metal or plastic as used in plumbing drains or hydraulic systems to muffle noise.
  • BOATS 

    May be used for bulkheads, decks, tanks, engine room ventilation ducting, fiberglass exhaust silencers & tubing.
peal and stick

DexDamp peel & stick sound dampening sheets could not be easier to use. Trim the DexDamp sheet to the desired shape with a scissors or knife. Then peel off the bottom layer to access the sticky side. Apply the sticky side directly to the surface being modified. That's it. Click here for additional tips.

Surface Preparation

For best results, surfaces should be clean, dry and free from grease, oil and dust. DexDamp has tackifying agents that help it to adhere to any substrate encountered in the assembly process.

Adhesion and Durability

DexDamp has demonstrated excellent adhesion to CRS, galvanized and galvanneal steel, ELPO and basecoat and clearcoat body panels.

Its outstanding adhesive performance allows it to maintain its position in the most demanding vertical and inverted applications, even at elevated paint bake temperatures. DexDamp maintains its acoustic and adhesive properties after subjection to the various test conditions used in the automotive industry.

 
Material Properties Appearance: Tacky mastic with aluminum
Color: Black
Specific Gravity: 1.03 +/- 0.05
Non-Volatile Content: 99% minimum
Flash Point: 248°C
Flammability: Passes with a rating of B < 1.0
Peel Adhesion: OCRS 7-10 pli avg. ED Coat 7-10 pli avg.
Application Temperature: 15°C to 43°C recommended
Corrosion Resistance: Resistant to water and salt
Shelf Life: 3 years if stored below 35°C
 

Acoustic Performance

DexDamp is a technologically advanced formulation that offers superior damping performance at a reduced weight over traditional mastic constrained layer and asphaltic extensional dampers. The damping performance is maintained from –10°C to 60°C allowing use in any area of the vehicle.

Safety and Handling Instructions

Caution: Always practice proper personal hygiene procedures after using this product. Consult the Material Safety Data Sheet for further safety and handing instructions.

For information and advice regarding transportation, handling, storage and disposal of chemical products, users should refer to the actual Material Safety Data Sheets containing physical, ecological, toxicological and other safety-related data.

Legal Notes

DexDampThe information, and, in particular, the recommendations relating to the application and end-use of DexDamp, are given in good faith based on DexDamp's current knowledge and experience of the products when properly stored, handled and applied under normal conditions.

In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchant-ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The proprietary rights of third parties must be observed.

All orders are accepted subject to our current terms of sale and delivery. Users should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request.